clip in ceiling is steady structure, flat surface, the installation system which is concealed, could be both used as ceiling and wall panel.
Get a Free QuoteFeatures
◉Clip in ceiling, widest applicable among all type of ceiling with outstanding advantages. Plain or Perforated pattern can be selected according to the actual requirement.
◉The Clip in system is the signature product of EOQR installation system, featuring double-layer clip in carriers.
◉The lower-layer carrier can also be adjusted to fit different sizes of the face panel. Clip in system which is concealed, steady structure, flat surface, could be both used as ceiling and wall panel.
Specifications
Base materials: Aluminum alloy #1100 series, #3003 series
Specification: 300x300mm, 300x450mm, 300x600mm, 300x1200mm, 400x400mm, 500x500mm, 600x600mm, 600x1200mm
Thickness: 0.4-1.2mm
Height: 19mm(short edge), 25mm(height edge)
Color: selecting according to the actual requirements
Features: moisture proof, fireproof, inside carrier
Type of surface: plain plate or perforated
Surface treatment: powder coated (ordinary powder, polyester powder), paint coated, film coated
Special order: any specification according to the actual requirements
Application: mostly used in big area ceiling such as shopping mall, station, gymnasium, banks, hospital and exhibition halls.
Plain plate or perforated plate is selected according to the actual requirements.
Legend
Folding Edge
Short Edge Right Angle
High Edge Right Angle
Short Edge Bevel Angle
High Edge Bevel Angle
Accessories
Big Triangle Keel (applicable for any specifications of invisible frame type aquare plate)
Aluminum Gold
Galvanized Iron
Standard Length 3m
Big Triangle Keel Hanging Parts
Flexibly bend according to actual situation
Aluminum Gold
Galvanized Iron
Big Triangle Keel Connecting Parts
Aluminum Gold
Galvanized Iron
Small Triangle Keel (only for 300x300mm short edge straight and bevel angle square plate)
Aluminum Gold
Galvanized Iron
Standard Length 3m
Small Triangle Keel Hanging Parts
Flexibly bend according to actual situation
Aluminum Gold
Galvanized Iron
Small Triangle Keel Connecting Parts
Aluminum Gold
Galvanized Iron
Installation Method
1. Install the wall angle in the same height;
2. Install the light steel main keel in suitable space, the distance between hanging poles should accord to the light steel main keel;
3. Binding the light steel main keel with the prepared hanging parts on the triangle keel, then clamp it under the light steel main keel in the vertical direction, the space of the triangle keel accords to the width of the plate, adjust it to level after finishing installation;
4. Press the two parallel edges into the triangle keel slot,firstly install one row of plate breadthwise and lengthways. make sure they are perpendicular, then install the rest plates;
5. Wear gloves when installing if finger printers or stains remain on the plates, please remove it off with warm water and detergent, then dry it.
A. Hanging pole
B. 38 main keel
C. Hanging parts of 38 main keel
D. Explosive bolt
E. Triangle keel
F. Hanging parts of triangle keel
G. Wall angle
H. Square plate
Project
Products
◉Clip In Ceiling