lay in ceiling would appear varied decorative style if used with different kinds of T-grid smooth lines, well-bedded, extra-strong 3D visual effect.
Get a Free QuoteFeatures
◉Every kind of Lay-in aluminum ceilings would appear varied decorative style if used with different kinds of T-grid. Smooth lines, well-bedded, extra-strong 3D visual effect and full of modem flavor.
Specifications
Base materials: Aluminum alloy #1100 series, #3003 series
Up size: 595x595mm, 603x603mm
Down size: 575x575mm, 585x585mm
Height: 9mm, 13mm
Width of edge: 5mm, 9mm, 10mm
Thickness: 0.5-1.0
Color: selecting according to the actual requirements
Type of surface: plain plate or perforated
Surface treatment: powder coated (ordinary powder, polyester powder), paint coated, film coated
Special order: any specification according to the actual requirements
Application: mostly used in big area ceiling such as banks, shopping mall, station, gym center
Plain plate or perforated plate is selected according to the actual requirements.
Legend
Installation Method
1. Install the wall angle in the same height;
2. Install the main keel with the hanging pole and hanging part;
3. Insert the auxiliary keel into the main keel, adjust to level;
4. Place the ceiling plate into the square grid;
5. Wear gloves when installing if finger printers or stains remain on the plates, please remove it off with warm water and detergent, then dry it.
A. Hanging pole
B. 38 main keel
C. Hanging parts of 38 main keel
D. Explosive bolt
E. Main tee
F. Cross tee
G. Hanging parts of Visible frame keel
H. Wall angle
I. Lay in plate
Project
Products
◉Lay In Ceiling